Ask a consultant a question
+79000978031 Do you want us to call you back?
0
Cart is empty
Cart (0)
Your shopping cart is empty!
Chiploader 2
Chiploader 2
Product Code: 69-01 Chipsoft

The chip-tuning software ChipLoader is designed to program a great number of ECUs, both Russian (Itelma, Avtel) and foreign (Bosch M(P,E,D,G) 7.x.x, Siemens SIMK 31/41/43, SIM2K 47/140/141/341/D160/34VR, Sirius D3/D4/D32/D42, Simtec 7x/8x, Simos 7.1, MS43, EMS3132; Delphi MT20x/22/38/80, MR140/HW240; ACDelco IEFI6/ITMS-6F; Keihin with SH7058 processors, etc.). TriCore TC1762/TC1766/TC1796 processors support in BSL mode.

Detailed description
78.00$
In Stock Buy in one click
* Basic set

Senselock protection key + Chiploader software with a set of standard modules.

Chiploader software modules

Intended for reading and flashing ME7.9.9 FLASH memory through the OBDII diagnostic link connector.

Intended for reading and flashing Sirius FLASH memory through the OBDII diagnostic link connector.

"Bosch M(E)7.9.7-OBDII" (Bosch Kefico M7.9.7, Bosch M7.9.7(+) (VAZ vehicles), Bosch M7.9.7+ (Geely, Amulet vehicles), Bosch M7.9.7.1 (Chevrolet Aveo vehicles), Bosch ME7.9.7 (Chery vehicles))

"Delphi HV240/MR140-OBDII" is intended for Chevrolet Aveo, Lacetti vehicles

Intended for ECUs reprogramming with Tricore TC1762 processors (including Bosch ECUs of ME(G)17.9.x family) in the boot mode using CAN bus and J2534 device.

"Delphi MT20U/MT38/MT20U2/MT22U-OBDII" is intended for Chery, BYD, Hoover, Lifan, Kia, Hyundai vehicles

Intended for Daewoo IEFI6/ITMS-6F ECUs reprogramming through GM-12 diagnostic link connector.

Intended for flashing ECUs FLASH memory of Bosch M78/ME797+ family through the OBDII diagnostic link connector.

Intended for reading and flashing ECUs FLASH memory (reading only for Avtel M73) of Yanvar-7.2+/M73 family through the OBDII diagnostic link connector.

Intended for reading and flashing FLASH and EEPROM of M74 ECUs installed in VAZ vehicles. The work with ECUs is in boot mode. Map flashing only is provided in order to accelerate the flashing process.

Intended for Chevrolet vehicles.

Intended for work with Bosch ME17.9.7 ECUs of VAZ, UAZ vehicles through the OBDII diagnostic link connector.

Intended for flashing ECUs FLASH memory of Bosch ME17.9.11, Bosch ME17.9.12 through J2534 device. Attention: this module can flash only production firmware!

Intended for flashing tuning and production firmware through the OBDII diagnostic link connector. The module can imitate the electronic signature of the uploaded dump to allow its flashing through the OBDII connector.

Intended for flashing Siemens SIM2K-140/141/341/D160 FLASH memory through the OBDII diagnostic link connector.

Intended for flashing M 7.9.8 and MG 7.9.8 FLASH memory through the OBDII diagnostic link connector.

Intended for flashing and reading various Siemens FLASH memory through the OBDII diagnostic link connector.

Intended for flashing and reading FLASH/ EEPROM memory of Mikas 10.3(М114) and Mikas 12.3 ECUs through a diagnostic link connector.

Intended for flashing and reading FLASH memory of Siemens 5WY SIMK41, SIMK43 (2 разъема), Siemens EMS 3132, Sirius D3/D4/D32/D42, Siemens SIM2K47 ECUs through BootStrapLoader.

Intended for flashing and reading FLASH memory of Siemens 5WY (5 connectors, KIA, Hyundai vehicles), Siemens 5WY SIMK31 (2 connectors, Chery QQ vehicles), Siemens MS43 ECUs through BootStrapLoader.

The module allows reading maps area, full flashing ACDelco E83, E39, E39A, E78 ECUs. Flashing is available only for maps area. It also allows recalculating the dump checksum before flashing.

Intended for flashing and reading FLASH memory of Siemens 5WP (Simos-7.1) ECUs through BootStrapLoader.

Intended for flashing and reading FLASH memory of Simtec-71.6. Simtec-75.1, Simtec 75.5, Delphi MT35E ECUs.

Intended for flashing and reading FLASH memory of Bosch EDC17C08, Bosch EDC17CP14, Bosch MED(G)17.9.8 through J2534 device.

Intended for flashing and reading FLASH memory of Keihin ECUs with SH7058 processors installed in Honda vehicles through the OBDII diagnostic link connector.

Intended for flashing and reading FLASH memory of ЭБУ SIM28, SIM29, SIM210, SIM22, EMS2204, SID206, Visteon ESU-131/411/412/415/418vehicles Ford.

Sale 50% for owners J2534 J2534 Chipsoft. The discount is granted after you provide your J2534 serial number.

The module "Denso ECU SH7058 - OBDII" is foreseen to read/write the FLASH memory for the ECUs Denso with the processor SH7058, set on such vehicles as Suzuki, Mitsubishi, Volvo and others of about 2007-2010 years of production.

The module is designed for readung and writing of Valeo V40/V42 ECU Flash memory of Renault vehicles reading

The module "VW Polo ECU - OBDII" can read, write FLASH memory for the ECU Magnetti Marelli 7GV, 7GVE set on vehicles VW via J2534 device. Checksum correction is also supported.

The module "Mazda Denso unboxed ECU - OBDII" can read, write FLASH memory for the unboxed ECU set on vehicles Mazda (2003-2013) via J2534 device. Checksum correction is also supported.

Module "China MT80 ECU - OBDII" is designed for reading and writing FLASH memory of the MT80 ECUs, installed on Chinese cars via J2534 device and KLine adapter.

Chiploader is one of the oldest solutions for chip-tuning in Russia.

Standard configuration includes support of the following ECUs:

  • Yanvar −5.x;
  • Yanvar −7.2;
  • VS-5.1;
  • Bosch M7.9.7, M7.9.7+;
  • Mikas-7.1;
  • Mikas −7.6;
  • Mikas −10.3;
  • Mikas −10.3+ (Mikas −11)
  • Mikas −11 (GAZ vehicles);
  • VS-8; Yanvar −7.2+;
  • Kefico M 7.9.7;
  • Bosch MP-7.0;
  • Bosch ME 7.9.9;
  • Bosch M 7.9.8;
  • Bosch MG 7.9.8;
  • Bosch ME 7.1;
  • Bosch ME 7.5;
  • Bosch ME 7.5.10;
  • Bosch ME 7.9.7.

Other ECUs support is available through additional modules. It means that a user’s requirements determine optimum configuration at a reasonable price.

Chiploader is a good solution for various brands — VAZ, GAZ, UAZ, ZAZ, Daewoo, Chevrolet, Opel, Hyundai, Kia, Chery, Geely, Renault, Dacia, Volkswagen, Audi, Skoda, Seat, BMW, Honda.

Main features:

  1. CAN bus support through J2534 devices.
  2. Conversion into/from various formats (Simos, Peugeot307, Bosch EDC16, Bosch ME9).
  3. Enigma and Enigma 2 (SMS-Software) support
  4. Fetch protection (only for Yanvar-5.x, VS-5.1).
  5. Reading/flashing of dual-mode software (for ECUs with this function)
  6. Immobilizer removal (only for Yanvar-5.x, VS-5.1).
  7. Switch to diagnostic mode with automatic launch of the diagnosis program.
  8. User files processing
  9. ChipExplorer integration
  10. Increased functionality due to plug-in use
  11. Various firmware formats support.
  12. K-Line adapter testing
  13. Netbook use

Increased functionality due to external plug-ins:

  1. EEPROM dump file recovery of Mikas −7.6 memory
  2. Immobilizer information copying (Siemens 5WY, Sirius, Siemens EMS 3132)
  3. Software version definition (for Yanvar-5.x, VS-1, Mikas-7.x families)

The program uses USB-donglese which is included into the delivery package.

The ECU programming is conducted through an ordinary K-Line adapter (both COM and USB) or a J2534 device. The majority of ECUs allow programming through a diagnostic link connector, some support BSL mode and EEPROM programming.

 

Minimum system requirements:

  • Windows XP/Vista/7;
  • Processor: Pentium III, 800 MHz;
  • 256Mb System RAM;
  • not less than 1Gb free HDD Space.
Related Products
Openport 2.0
Openport 2.0 189.00$