FEMTO OBD Flasher is software solution for Bosch MDG1 ECU's family chip-tuning. With this tool you can easily make Virtual Read of MDG1 ECU directly from OBD socket. No need to remove or disassemble ECU. All operations are easy and safe.
Software is available in three different versions: standart, master and slave. You need the Master version if you plan to work with your remote branches. With this version you can Encrypt / Decrypt files for your slaves. OBD readout protection is included. Master supports up to 5 slaves by default. Additional 5 slaves are available for an additional fee.
You will get an 8Mb ORI full file that you can tune to your liking: chip tuning, DPF switch off, EGR switch off, catalytic converter removal, Vmax, etc. After applying the new improvements to the ORI file — you can easily write it back by OBD.
No need to think about checksum calculations. Everything is done automatically. Virtual reading is available for all software variants. If we don’t have the file for your car on our server — we will add it in under 24 hours.
- FEMTO calculates all checksums inside FLASH (also known as CS);
- CVN and CALID will be automatically corrected to match stock;
- Dealer program ID number remains the same as original;
- Date of programming will not be changed;
- Open standard. BIN file after Virtual Reading (VR);
- Technical support 24/7.
- Bosch MDG1, Motorola MPC5777, PPC (MC);
- Bosch MDG1, Infeneon AURIX TC27xxx (MC).
Requirements to start flashing:
- FEMTO OBD Flasher software;
- Windows OS 7,8,10 x32/x64;
- Laptop with Ethernet port RJ-45 (DHCP should be enabled);
- Standard BMW ENET cable;
- Stable internet connection;
- Car battery charger with sufficent power (like GYSFLASH 100.12 HF or CTEK MXTS 40)
Supported car list:
Engine, ECU, Model code:
B46 (B46B20B), DME 840, F20, F21, F22, F23, F30, F31, F32, F32, F33, F34, F35, F36;
B48 (B48B20A), DME 840, F30, F31, F32, F34, F35, F36, F45, F46;
B48 (B48B20A), DME 841, F20, F21, F22, F23, F30, F31, F32, F32, F33, F34, F35, F36;
B58 (B58B30A), DME 860, F30, F31, F32, F34, F35, F36.
BMW G-SERIES, Rolls Royce
Engine, ECU, Model code:
B46 (B46B20B), DME 840, G30, G31, G32, G11, G12, G01;
B47 (B47D20A), DDE 802, G30, G31, G01;
B48 (B48B16A), DME 840, G01,G30, G31;
B57 (B57D30A), DDE 840, G30, G31, G32, G11, G12, G01;
B57 (B57D30A), DDE 832, G30, G31, G32, G11, G12, G01;
B57 (B57D30C), DDE 832, G30, G31, G32, G11, G12, G01;
B58 (B58B30A), DME 860, G01, G11, G12, G30, G31, G32;
N63 (N63B44C), DME 880, G11, G12;
N63 (N63B40B), DME 880, G12;
N74 (N74B66B), DME 8C0, G12;
N74 (N74B68A), DME 8CT0, Phantom RR11, Phantom EWB RR12;
B48 (B48B20B), DME 840H, G30, G38, G11, G12;
S63 (S63B44B), DME 88T0 AURIX, F90 M5.