Ask a consultant a question
+79000978031 Do you want us to call you back?
Cart is empty
Cart (0)
Your shopping cart is empty!

FEMTO v 1.60

FEMTO OBD Flasher is Worlds first MDG1 flasher, it support all kind of MD1 / MG1 for BMW.

We always keep it updated to support new versions of  dealer software updates. Beta test of TC1797 is over and now it's available for all of our customers without any restrictions

Whats new in version 1.60 ?

[DME/DDE] added support for all BOSCH DDE / DME based on TC1797
[DME/DDE] programming counter freeze for TC1797 ECU's
[EGS] Added EGS support for 8HP on F and G series 
[enet]  Improved flashing time for MDG1 
[enet]  Improved USB to Ethernet adapters support

DDE / DME based on TC1797
•    Bosch EDC17C41
•    Bosch EDC17C50
•    Bosch EDC17C56
•    Bosch EDC17CP45 
•    Bosch EDC17CP49
•    Bosch MEVD17.2.4
•    Bosch MEVD17.2.5
•    Bosch MEVD17.2.6
•    Bosch MEVD17.2.9
•    Bosch MEVD17.2.G 
•    Bosch MEVD17.2.8 
•    Bosch MEVD17.2.H

•    GSB23TU
•    GSB231
•    GSZFB1
With FEMTO OBD Flasher you can easily make Virtual Read of MDG1 / EDC17 / MEVD17 / 8HP EGS Mechatronic ECU directly from OBD socket. No need to remove or disassemble ECU. All operations are easy and safe.
You will get an 4MB ORI for EDC17 / MEVD17 and 8Mb ORI full file in case of MDG1 ECU's that you can tune to your liking: chip tuning, DPF switch off, EGR switch off, catalytic converter removal, Vmax, etc. After applying the new improvements to the ORI file – you can easily write it back by OBD.
Now you are able read and write calibrations ZF EGS 8HP.
Available for almost all 8HP models in BMW F & G series. 
You will get an 2MB ORI file. After applying the new improvements to the ORI file – you can easily write it back by OBD same as DME / DDE.
No need to think about checksum calculations. Everything is done automatically. Virtual reading is available for all software variants. If we don’t have the file for your car on our server – we will add it in under 24 hours.
  • FEMTO calculates all checksums inside FLASH (also known as CS);
  • CVN and CALID will be automatically corrected to match stock;
  • Dealer program ID number remains the same as original;
  • Programming counter stay not changed for TC1797 ECU's
  • Date of programming will not be changed;
  • Open standard .BIN file after Virtual Reading (VR);
  • OBD Read for any stock state ECU without OBD protection.
  • Technical support 24/7.