1. Added a new package 71 "Bosch MEDC17 Bootloader", designed to work in service mode with the ECU MED17/EDC17 on the table, supports reading, writing full flash (except the boot area of Bosch), EEPROM blocks, check and correction of COP, without the need to open them. Direct connection to the ECU connector, J2534 scanmatik 2 or Scanmatik 2 Pro adapter and the corresponding cable are required for operation.
Bosch MEDC17 Bootloader
direct connection to the ECU connector and scanmatik 2 or Scanmatik 2 Pro adapter are required for operation
MEDC17 (TC1762/1766/1792/1796) FLASH [RD / WR/CK]
MEDC17 (TC1762/1766/1792/1796) EEPROM [RD/WR]
MEDC17 (TC1724/1728/1767/1782/1784/1797) FLASH [RD / WR/CK]
MEDC17 (TC1724/1728/1767/1782/1784/1797) EEPROM [RD / WR]
MEDC17 (TC1791/1793) FLASH [RD/WR/CK]
MEDC17 (TC1791/1793) EEPROM [RD / VR]
MEDC17 BSL PASSWORD [RD]
2. Added a new package 72 "Mazda Gen 4", designed to work with Mitsubishi ECU and Denso, installed with gasoline engines in Mazda vehicles from 2019 model year. Supports reading, writing, checking and correction of COP.
Mazda Gen 4
1.5 L, 2.0 L, 2.5 L SKYACTIV-G P5/PA/PE/PY MY2019 (Mitsubishi) [PYFA] [RD / WR/CK]
1.5 L, 2.0 L, 2.5 L SKYACTIV-G P5/PA/PE /PY MY2019 (Denso) [PYFB] [RD / WR/CK]
3. In package 59 "the Renault/Nissan UDS" added support Hitachi ECU, is built on the processor family, RH850. Reading, writing, checking and correction of checksums are supported.
1.8 T, 2.0 T Hitachi UDS (RH850/4MB) [RD / WR/CK]
4. The package 69 "Mercedes-Benz MED17/EDC17" added support for ECU MED17.7.5, as well as virtual reading of MED17 calibration files.7.x.