Blog

Flex version 3.15.0.0

Flex version 3.15.0.0

Flex ver 3.15.0.0: more “FLEXIT” solutions coming up!MAGICMOTORSPORT has released new OBD and Bench protocols for vehicles and tractors. With Flex version 3.15.0.0, we have improved the OBD protocol for VAG MD1 & MG1, which from today supports most of VAG models: Audi, VW, Seat, Lamborghini, Porsche, Skoda.Plus, good news about the MEDC17 control unit th..

31/10/2019
0
22
K-Suite 3.61

K-Suite 3.61

NEW MODELS OF LCV, MOTORCYCLES, MARINE ENGINES AND CARS NOW SUPPORTED BY K-TAG SM (SERVICE MODE)!NEW FORD, IVECO, KTM, RENAULT, TOYOTA, VOLVO AND VOLKSWAGEN VEHICLES, NOW SUPPORTED BY K-TAG SM (SERVICE MODE): REMAP THEM WITHOUT OPENING THE ECU!Read and write directly on bench the ECUs Bosch EDC17C69, EDC17CP19, EDC17CP20, EDC17CP22, EDC17CP58, EDC17CP65, M17.8.42, ME17.9.21 and ME17.9.53!To u..

31/10/2019
0
15
K-SUITE 3.59

K-SUITE 3.59

THANKS TO THE NEW K-SUITE UPGRADES, THE LATEST GENERATION ECU INSTALLED ON EURO 6B CARS WILL BE SUPPORTED.News on the way! As of today, Alientech will introduce Service Mode (SM).Up until a year ago, to work on the ECUs, it was necessary to disassemble them on the bench, connecting directly to the board, using the manuals included in the dedicated software.In March 2019 we introduced the ..

17/10/2019
0
39
K-SUITE 3.59

K-SUITE 3.59

THANKS TO THE NEW K-SUITE UPGRADES, THE LATEST GENERATION ECU INSTALLED ON EURO 6B CARS WILL BE SUPPORTED.News on the way! As of today, Alientech will introduce Service Mode (SM).Up until a year ago, to work on the ECUs, it was necessary to disassemble them on the bench, connecting directly to the board, using the manuals included in the dedicated software.In March 2019 we introduced the ..

17/10/2019
0
27
FLEX version 3.14.0.0

FLEX version 3.14.0.0

MD1 and MG1 VAG by OBD: it’s now possibleMAGICMOTORSPORT has just released new OBD protocols for MD1 and MG1 ECUs used on VAG group cars in FLEX version 3.14.0.0, allowing you to work on these units quickly and easily.All “stages” are completed effortlessly and quickly by OBD.These solutions for MD1 and MG1 VAG control units provided by MMS can also be recalibrated directl..

17/10/2019
0
40
K-Suite 3.57

K-Suite 3.57

THANKS TO THIS UPDATE OF K-SUITE FOR KESSV2, NEW OPEL, PEUGEOT AND TOYOTA VEHICLES, WITH ECU BOSCH EDC17C60, ARE NOW SUPPORTED!Many models of Citroën and Peugeot, Opel Granland X and Toyota Proace with microprocessor TC1793, can now be read and written thanks to KESSv2, the programmer for engine and transmission ECUs via OBD port. Choose between Master tool, to have the complete control on re..

28/09/2019
0
59
FLEX ver. 3.12.0.0 released

FLEX ver. 3.12.0.0 released

FLEX version 3.12.0.0 released: MDG1 ECUs with AURIX TC27x / TC29x, solutions for Ford vehicles and new featuresWe’ve reached another milestone in our study of MD1 & MG1 units and have released the newer models of AURIX TC27x / TC29x ECUs that mount Tricore processors giving you a solution that guarantees speed, reliability and competitiveness during the reading and writing..

17/09/2019
0
57
FLEX ver. 3.12.0.0 released

FLEX ver. 3.12.0.0 released

FLEX version 3.12.0.0 released: MDG1 ECUs with AURIX TC27x / TC29x, solutions for Ford vehicles and new featuresWe’ve reached another milestone in our study of MD1 & MG1 units and have released the newer models of AURIX TC27x / TC29x ECUs that mount Tricore processors giving you a solution that guarantees speed, reliability and competitiveness during the reading and writing..

17/09/2019
0
51
Flex ver 3.11.0.0 released

Flex ver 3.11.0.0 released

New solutions for MG1 Ford and Denso ECUsMAGICMOTORSPORT has released new solutions for programming Denso ECUs installed on Isuzu and Mazda Skyactiv vehicles in OBD / BENCH mode. BENCH protocols for TC17xx and OBD protocols for MG1 ECUs installed in Ford vehicles are also available in the FLEX version 3.11.0.0 SW release.New protocols added:Ford Bosch M..

03/09/2019
0
61
Kess v2 update:

Kess v2 update:

Added support for working through a diagnostic connector with BOSCH MG1CS003 blocks installed on BMW 5 and 7 series cars.working with vehicles equipped with two ECUs Master and Slave is now available.To perform these operations safely, in the TOOL menu, you must manually select the Backup and Restore functions (backup and recovery) of the CAFD file (CAFD or CAF-Datei is a file that contains the co..

02/09/2019
0
54
Flex ver 3.10.0.0 released

Flex ver 3.10.0.0 released

Ready for the Race? Flex ver. 3.10.0.0 releasedFrom today on, you can work on the latest models of supercars equipped with a new BOSCH MDG1 ECU.Lamborghini Urus, Audi RS5 and Porsche Panamera are just a few of the ECUs added on this FLEX release.New protocols added:Audi Bosch MG1CS111 (2.0 TFSI) SPC5777 Bench: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM, Full..

20/08/2019
0
63
MAGIC Summer Madness

MAGIC Summer Madness

MAGIC Summer Madness. FLEX now yours at a cool price!Our 2019 summer offer is out!For a limited time only from August 9th to August 23rd 2019, MAGICMOTORSPORT is offering you the chance to start tuning, repairing and pairing* our newly supported MDG1 control units in Bench mode at a fantastic promotional price.Purchase your FLK02 FLEX kit today and customize..

10/08/2019
0
108
FLEX ver. 3.9.0.0 – MDG1 Release

FLEX ver. 3.9.0.0 – MDG1 Release

The newest generation of Bosch ECUs , MD1 & MG1, are now available for FLEXMAGIC gives you a COMPLETE TUNING SOLUTION!Mechatronics, the wait is over, MAGICMOTORSPORT has released new solutions for Bosch MD1 & MG1 control units.These protocols support the latest generation of ECUs present in BMWs as well as many models of Mercedes and VAG and mor..

06/08/2019
0
102
Flex ver 3.6.0.0 release

Flex ver 3.6.0.0 release

A new update is available now with more than a thousand vehicles added. We implemented the protocols for Toyota Denso 896xx (most vehicles from 2005 to today still use one of those ECUs).All those vehicles which are supported will be done by Flex with only one protocol, meaning it is able to autodetect which is the most correct way to work with the unit.Furthermore, big improvements to t..

20/06/2019
0
153
FEMTO v 1.60

FEMTO v 1.60

FEMTO OBD Flasher is Worlds first MDG1 flasher, it support all kind of MD1 / MG1 for BMW.We always keep it updated to support new versions of  dealer software updates. Beta test of TC1797 is over and now it's available for all of our customers without any restrictionsWhats new in version 1.60 ?[DME/DDE] added support for all BOSCH DDE / DME based on TC1797[DME/DDE] pr..

01/06/2019
0
163
Flex ver 3.5.0.0

Flex ver 3.5.0.0

Another Flex release is out with many interesting news: Flex ver 3.5.0.0First of all is the addition of the ISN reading function by OBD for the latest BMW Fxx Series mounting MG1CS003 ECU,and of course of the OBD protocol to read and write many other MG1 and MD1 ECUs on BMW.We also added support for the 8HP Fxx Series TCU!Another interesting news is the added support for H..

22/05/2019
0
140
Promotion from Alientech

Promotion from Alientech

Dear friends, we are pleased to inform you about discounts for renewing a subscription to software updates of all devices from the company Alientech!If your subscription expired from January 2010 to May 2018, you have the opportunity to receive software updates before January 1, 2020 at the price of an annual subscription.In addition, for all subscriptions that have expired from June 2018 to today..

15/05/2019
0
172
KESSV2: OBD PROTOCOLS FOR MERCEDES AMG AND MORE …

KESSV2: OBD PROTOCOLS FOR MERCEDES AMG AND MORE …

FROM TODAY YOU CAN DOWNLOAD THE NEW 3.42 SOFTWARE UPDATE!You will be able to write the Bosch MED17.7.1, MED17.7.2, MED17.7.3, MED17.7.5 and MED17.7.3.1 ECUs in total safety and efficiency for the models of the German car company!If you already own a KESSv2, you won’t need to buy anything! You just have to connect your tool, read the ID of the ECU and, thanks to the OBD Virtual Reading mo..

15/05/2019
0
146
FLEX release ver. 3.4.0.0

FLEX release ver. 3.4.0.0

This OBD & Bench protocol isan exclusive of Flex, and can be considered an improvement of the bench protocol for Tricore-based BOSCH ECUs.Fast, safe and able to both tune and clone, this new solution will change the way most mechatronics work in their daily life.At the moment we support many new ECUs - some of them are not even possible by any other protocol.Fast, safe..

06/05/2019
0
289
 KESSV2: BMW G SERIES AND F SERIES PETROL IN OBD2!

KESSV2: BMW G SERIES AND F SERIES PETROL IN OBD2!

THE NEW PROTOCOL DEDICATED TO THE BMW G SERIES AND F SERIES IS OUT!Do you have KESSv2, the OBD2 standard cable and an active subscription?! Thanks to the new software update 3.39, you can read and write the petrol control units Bosch MG1 of the BMW G series and F series in total safety and efficiency!NEW BMW G SERIES AND F SERIES PETROL ECU REMAPPING SUPPORTED IN OBD2:ModelECUFuncti..

03/05/2019
0
139
Released the next version of the Scanmatik program - 2.21.3.

Released the next version of the Scanmatik program - 2.21.3.

Dear users of Skanmatik equipment!Released the next version of the Scanmatik program - 2.21.3.Changes:- RP1210: slow or no Bluetooth connection in 2.21.2 (Cummins Insite and others)- J2534: PCMFlash 71/53 modules did not work when selecting "alternative" GPT outputs (7-13) in 2.21.2- ECAS6x2: calibration procedures clarified, configuration procedures for specific identifiers corrected- ECAS6x2, AD..

12/04/2019
0
200
Flex ver 3.3.0.0 released

Flex ver 3.3.0.0 released

Flex ver 3.3.0.0 released: Solutions for EDC17CP50, MED17.9.7, MED17.7.7With FLEX you no longer open the engine control unit: new protocols to work on the bench on Tricore Bosch ECUs.Today our supported vehicle list increases in size, as we added Mercedes MY2018/2019 (MED17.7.7), Jaguar & Land Rover with 2.0 Turbo engine (MED17.9.7) and Honda 2.2 turbo (EDC17CP50).Thanks to FLEX’s Bench m..

12/04/2019
0
135
OPEN YOUR MIND, NOT THE ECU: K-TAG TRICORE SERVICE MODE, A NEW WAY TO REMAP!

OPEN YOUR MIND, NOT THE ECU: K-TAG TRICORE SERVICE MODE, A NEW WAY TO REMAP!

Keep in touch with Alientech: thanks to the latest K-Suite update, with K-TAG, you can work on bench, also on the ECUs with microcontroller TC1793, without having to open them!Do you have an active subscription on K-TAG Master or Slave with Tricore-ST activation?! You won’t need anything more! It’s not necessary buying any new hardware, cables or adapters, but you can remap the ECU directly throug..

12/04/2019
0
217
KESSV2: BMW G-SERIES 2.0D AND 3.0D IN OBD2!

KESSV2: BMW G-SERIES 2.0D AND 3.0D IN OBD2!

We are ready with the new protocol dedicated to the BMW G series!Thanks to the new K-Suite update, you’ll be able to work in OBD2 on the ECUs of the BMW Gxx Series equipped with 2.0 and 3.0 diesel engines.As of today, to read and write these vehicles you just need KESSv2 and the OBD2 standard cable: these are the only tools you’ll need to work safely and efficiently.All the ECU..

29/03/2019
0
101
K-TAG TRICORE SERVICE MODE: NEW SUPPORTED ECUS!

K-TAG TRICORE SERVICE MODE: NEW SUPPORTED ECUS!

Thanks to the latest K-Suite update, it will be possible to work on bench with K-Tag also on ECUs with microcontroller TC1724 without having to open them. You won’t have to buy new hardware, cables or adapters! To receive the new activation for free you just need an active subscription on K-TAG Master or Slave with Tricore-ST activation.Tricore Service Mode.Remap the ECU on bench without..

27/03/2019
0
109
Skanmatik 2/2 PRO - version 2.21.2

Skanmatik 2/2 PRO - version 2.21.2

The next version of the program for Skanmatik 2/2 PRO - version 2.21.2 has been released, new optional adapters are also available for order:Major changes and additions:- PAZ: added Allison 2000 Gen.4 transmission control unit (cars 2007-2014)- KAMAZ / MAZ: added diagnostics of the SCR MGS / De-tronic system according to the factory protocol- KAMAZ / MAZ: added diagnostics systems Daimler MR Euro ..

23/03/2019
0
244
FLEX 3.2.0.0 - OBD MEDC17 Mercedes

FLEX 3.2.0.0 - OBD MEDC17 Mercedes

FLEX release ver. 3.2.0.0 – OBD MEDC17 Mercedes is now availableThis OBD protocol has been improved since its first appearance in MAGPro2 x17 thanks to the advanced hardware of FLEX. We have also added new protocols to work by bench and Bootloader on Tricore processors!Coming up next: Renesas…New Protocols added:Alfa Romeo Bosch MED17.3.1 TC1766 Bench: Read/Write/Checksum Internal Flash, Read..

21/03/2019
0
126
Combiloader 2.16.7010

Combiloader 2.16.7010

Bosch EDC7UC31 module: Added ECU recording algorithms.Bosch Module M (E) 7.9.7 version 1.28: The list of supported software has been expanded.Bosch ME17.9.x module VAZ / UAZ: Added the ability to unlock the ME17.9.71 ECU.New module Bosch MEDC17 BSM (J2534).Bosch MEDC17 Hyundai / Kia UDS module: Added ability to unlock the EDC17C57 ECU.Bosch MEDC17 module VAG K / CANTP2.0: Improved recording of cer..

13/03/2019
0
184
FLEX release 3.1.0.0 is out, alongside FLEX's first batch of OBD protocols!

FLEX release 3.1.0.0 is out, alongside FLEX's first batch of OBD protocols!

FLEX release 3.1.0.0 is out, alongside FLEX's first batch of OBD protocols!MAGICMOTORSPORT is proud to announce that from today Flex can officially be used via OBD on BMW and VAG MEDC17, respectively by ENET and OBD cables connected to the tool. Thanks to Flex interfacing system, it is NO longer needed (as with X17 and most of the tools on the market) to connect the OBD cable to the computer and u..

08/03/2019
0
119
ChipLoader 2.37

ChipLoader 2.37

Dear user!We would like to let you know about the new update of ChipLoader 2.37Such possibilities have been added in the new update:Support of the processors TC1792, as well as the possibility to read GPT passwords for the ECU Bosch set on Ford, Opel, Volvo vehicles have been added to the module “Tricore TC1762/1766/1796/1797/1767/1724/1738/1791/1793/1798/1728/1782/1784/1792, Bosch ME(G)17.9,x - b..

04/03/2019
0
161
Flex version 3.0.1.0 released

Flex version 3.0.1.0 released

New protocols released:Chrysler Bosch EDC16CP31 MPC564 BDM: Read/Write/Checksum Internal Flash, Read/Write/Checksum External Flash M58BW016DBCitroen Bosch EDC16C3 MPC556 BDM: Read/Write/Checksum Internal Flash, Read/Write/Checksum External Flash AM29BL802C, Read/WriteExternal EEPROM 95160Dodge Bosch EDC16CP31 MPC564 BDM: Read/Write/Checksum Internal Flash, Read/Write/Checksum External Flash M58BW0..

26/02/2019
0
164
Update MMC Flasher

Update MMC Flasher

Added and available for purchase a new module: 70 Module, Isuzu Transtron. It supports identification, reading Full Flash, writing calibrations, reading / erasing errors, recalculation of the checksum...

25/02/2019
0
143
FLEX release 3.0.0.0

FLEX release 3.0.0.0

FLEX release 3.0.0.0 includes new protocols and big news: Your subs have run out? FLEX keeps working!MAGICMOTORSPORT has implemented a new licensing system that allows you to use the BDM MPC5xx and Toyota AUD76F00XX protocols offline.To have access to these protocols, you will not need an internet connection: you must simply log in to the server every 7 days.This system allows you to use your..

21/02/2019
0
201
ECM TITANIUM 2.0: NEW SOFTWARE UPDATE!

ECM TITANIUM 2.0: NEW SOFTWARE UPDATE!

With ECM Titanium 2.0, Alientech team has brought several important improvements that will simplify your work! A new file matching system, that will be constantly extended and updated, has been created and a new structure dedicated to drivers that enables to increase the maximum number of maps contained has been introduced.Moreover, thanks to the latest modifications, the new software will be..

21/02/2019
0
155
K-Suite 3.28

K-Suite 3.28

UVs, sports cars and commercial vehicles: find out all the news of the latest software update!With the new K-Suite 3.28 software update, you’ll be able to read and write via OBD2 – with KESSv2 – many Mercedes vehicles equipped with engines 1.6, 2.2 and 3.0 Diesel and managed by ECUs Bosch EDC17CP57 and EDC17C66.Supported ECUs:Bosch EDC17CP57 with Microcontroller TC1793Bosch EDC17C66 with Microcont..

21/02/2019
0
117
PcmFlash 1.1.99

PcmFlash 1.1.99

1. Added a new package 71 "Bosch MEDC17 Bootloader", designed to work in service mode with the ECU MED17/EDC17 on the table, supports reading, writing full flash (except the boot area of Bosch), EEPROM blocks, check and correction of COP, without the need to open them. Direct connection to the ECU connector, J2534 scanmatik 2 or Scanmatik 2 Pro adapter and the corresponding cable are required for ..

03/02/2019
0
219
FLEX ver. 2.3.0.0 released

FLEX ver. 2.3.0.0 released

To top off 2018 here’s another release for FLEX! We’ve thrown in a few new protocols in the FLS0.10 and FLS0.3 FLEX SW packages and done a quick bug fix on the existing ones as an extra bonus for our users.New Protocols Added:FLS0.10 – Software Flex BL TRICORE + Bench Bosch MEDC17 Audi Bosch EDC17CP04: Bench Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROMAudi Bosc..

21/12/2018
0
173
Discounts from Sms-Soft

Discounts from Sms-Soft

From December 20 to January 9 there are New year discounts!1. Set ChipTuningPRO + M73 + M74.5 + M75 (basic set with key and module M73, M74.5, M75 WHA) for 16000 RUB (you save 7000 RUB.)2. Let's give a basic kit ChipTuningPRO when buying any modules ChipTuningPRO in the amount of 20,000 rubles.3. Discounts in honor of the upcoming 2019: the purchase of software modules ChipTuningPRO or CombiLoader..

21/12/2018
0
168
New year discounts PcmFlash

New year discounts PcmFlash

Hello! From 19.12.2018 to 30.12.2018 (inclusive) there is a 10% discount on the purchase of packages to the loader by promo code SALE10. In the case of a one-time purchase of packages for one key in the amount of 25000r (excluding discounts), a discount of 15%, and the amount of the order from 50000r - 19%.  Data on customers who have purchased but not activated packages must be tra..

18/12/2018
0
166
Flex release ver. 2.2.0.0

Flex release ver. 2.2.0.0

This time Santa brought you huge updates for both your favourites tools. Here are all the new opportunities you can take advantage of with new Flex release, ver 2.2.0.0, codenamed H.0.0.H.0.0.H.0.0!Santa granted us this special codename due to our efforts into doing another favour for the most hardworking team of Christmas: a brand new set of tunes on their Polaris bikes (using ME17.9.74), al..

18/12/2018
0
177
MAGPro2 X17 ver 12.09.00 released

MAGPro2 X17 ver 12.09.00 released

Here we are with a new MAGPro2 X17 update! Besides the most important news – Mercedes MEDC17 by OBD – we have new clone protocols for Delco and few interesting OBD protocols for Subaru!Enjoy the update, but most importantly Merry Christmas and Happy New Year!..

18/12/2018
0
139
KESSv2: Nissan-Infiniti via OBD!

KESSv2: Nissan-Infiniti via OBD!

We’re introducing today a new K-Suite updatededicated to Nissan and its luxury division Infiniti. Only with KESSv2 you’ll have the chance to remap theseHitachi ECUs: MEC100, MEC7x and DEA030..

18/12/2018
0
139
BitBox Christmas Sale!

BitBox Christmas Sale!

Till 31.12.2018 u can get any BitBox or BitEdit modules with 15% discount. By promo code SALE15..

17/12/2018
0
141
K-Suite 3.23 BMW E-SERIES AND MINI IN OBD!

K-Suite 3.23 BMW E-SERIES AND MINI IN OBD!

We are today introducing a highly anticipated software update: with K-Suite 3.23 you’ll be able to work via OBD on the diesel ECUs of the BMW E-Series and Mini R-Series!From now on, to read and write these vehicles, you won’t need to open the ECU anymore: KESSv2 and standard cable are the only tools you’ll need!All the ECUs Bosch EDC17C06, EDC17C41, EDC17C50, EDC..

05/12/2018
0
170
TOYOTA AND LEXUS: NOW SUPPORTED BY KESSV2!

TOYOTA AND LEXUS: NOW SUPPORTED BY KESSV2!

New software update! Many new vehicles supported by KESSv2 including new gen Toyota Tacoma and Camry and the latest Lexus IS, ES and RC!Only with the updated version 3.19 of K-Suite you’ll be able to read and write in OBD the ECU Denso 89661-04 of the Japanese brand Toyota and of its luxury division Lexus.ECU Denso 89661-04xxx Micro D76F019xxx: reading and writing now supported by KESSv2..

26/10/2018
0
186
K-Suite 3.17 TOYOTA HILUX

K-Suite 3.17 TOYOTA HILUX

New software update! Many new vehicles supported by KESSv2 including new gen Toyota Hilux and Land Cruiser Prado!Only with the updated version 3.17 of K-Suite you’ll be able to read and write in OBD the ECU Denso 89666-0K of the Japanese brand Toyota.ECU Denso 89666-0Kxxx Micro D76F019xxx: Virtual Reading and writing supported by KESSv2! No new accessory needed: just make sure you have an act..

03/10/2018
0
460
New K-suite update 3.16

New K-suite update 3.16

This week, our Research & Development team has focused on K-TAG. Today we propose you many new supported vehicles: not only cars, but also trucks, commercial vehicles and tractors!Update your K-Suite to Version 3.16 and you’ll be able to work on a lot of new vehicles and manage the control unit of both engine and automatic transmission of Continental SIM2K-240.Working directly with K..

28/09/2018
0
151
Alientech We’re now supporting the Transmission Control Unit of VAG MQB!

Alientech We’re now supporting the Transmission Control Unit of VAG MQB!

Thanks to this update it will be possible to tune the automatic transmission Temic DQ250 MQB TCU of both Diesel and Petrol vehicles of the VAG group.Note: the latest updates of K-Suite are only available on K-Suite V3. If you’re still using version 2.47, download now the new K-Suite V3...

14/09/2018
0
222
MAGPro2 X17 ver 12.08.00 Released

MAGPro2 X17 ver 12.08.00 Released

Standard release for MG1/MD1 BMW + some new protocols and several bug fixes, while we go towards release of Flex: New Protocols Added:Audi Continental SIMOS 18.2 Bootloader Maps Read/Write/Checksum, Bootloader EEPROM Read/Write, Backup/Restore Full Read/Full WriteBMW Fxx Bosch Hybrid (Electric Motor) Control Unit HCU TC1797: Bootloader EEPROM Read/Write/Checksum/RecoveryBMW Gxx Bosch MD1CP002..

11/09/2018
0
244
K-SUITE 3.12: BMW MOTORRAD BOSCH ME17.2 BMS-X OBD

K-SUITE 3.12: BMW MOTORRAD BOSCH ME17.2 BMS-X OBD

K-SUITE 3.12: BMW MOTORRAD BOSCH ME17.2 BMS-X OBD We present to your attention a new release designed for the kessv2 tool. Now BMW Motorrad motorcycles with ECU Bosch ME17.2 BMS-X can be reprogrammed using the kessv2 flasher using the diagnostic connector!Note: the latest updates for KESSv2 are only available for K-Suite V3 SOFTWARE. If you are still using version 2.47, then you need to downl..

01/08/2018
0
355