Update PcmFlash

Change: the package 23 - 127,39 Euro (no more discounts), 31 - 99,08 Euro (no more discounts), 34 - 99,08 Euro

Title change: 34 - "Kia / Hyundai EDC15 / EDC16", 44 - " Scania EMS S7/S8"


1. Added new package 62 "Ford/Getrag 6DCT450", designed to work with the control UNIT gearbox 6DCT450, installed in cars Ford/Volvo / JLR. Supported read, write, clone the ECU.


Ford / Getrag 6DCT450 - 141,55 Euro

TCM PowerShift (6DCT450) [RD/WR]

PowerShift 6DCT450 Boot (MICRO/EEPROM) [RD/WR]


2. Added new package 63 "Renault DC4", designed to work with a DC4 transmission control UNIT, installed in the cars of Renault. Supported read, write, review, and correction of the COP.


Renault DC4-70.77 Euro

EDC DC4 Gearbox (TC1766/1506KB) [RD/WR/CK]


3. Added new package 64 "Mitsubishi Fuso Canter" that is designed to work with the ECU EDC7/EDC16/EDC17 diesel engines Mitsubishi Fuso Canter. Supported read, write, review, and correction of the COP. For some cars with ECU EDC7/EDC16 for writing may require a direct connection to the connector block.


Mitsubishi Fuso Canter - 141,55 Euro

Fuso Canter (EDC7C4-6/EDC16C31) [RD/WR/CK]

Fuso Canter Euro 5 CAN-bus (EDC17CP15) [RD/WR/CK]

Fuso Canter Euro 5 CAN-bus (EDC17CP52) [RD/WR/CK]


4. The package 23 "Subaru Denso" added support for the control UNIT diesel engine Euro 6, as well as gasoline engines 2018 model year. Supported read, write, review, and correction of the COP.


1.6 L, 2.0 L Denso DI 2018+ CAN-bus (1N83M/1.5 MB) [RD/WR/CK]

2.0 L Denso Diesel Euro 6 CAN-bus (SH72543/2MB) [RD / WR/CK]


5. The package 25 "Renault / Nissan dCi" added support for the control UNIT SID309, installed on Renault Master cars with a diesel engine of 2.3 liters. Supported reading, writing, checking and correction COP.


6. In the package 29 "Ford PWM" added support for ECU PCM150. Supported read, write, review, and correction of the COP.


3.0 l, 4.0 l, 4.6 L Duratec V6 / V8 (PCM150) [RD / WR/CK]


7. In pack 34 "Kia/Hyundai EDC15/EDC16" added support for ECU EDC15C7. Supported read, write, review, and correction of the COP.


2.0 L, 2.5 L CRDI K-Line (EDC15C7) [RD/WR/CK]


8. Toyota/Lexus/Scion/Hino package 35 adds support for hybrid installation control control unit (ECU). Supported entry, verification and correction of the COP.


76F0038/39/40/50/70/85 HV Control CAN-bus [WR/CK]


9. In pack 44 "Scania EMS S7/S8" added support for EMS S8 ECUS. Supported entry, verification and correction of the COP.


Scania EMS S8 250Kbps (MPC5566) [WR/CK]

Scania EMS S8 500Kbps (MPC5566) [WR/CK]


10. The package 53 "Infineon Tricore BSL" added reading passwords ECU Continental SID 208 (PSA), Bosch MED17.9.3 (Honda), read and write external EEPROM ECU Delphi CRD3.1 (Mercedes-Benz).


Delphi CRD3.1 EEPROM (32KB)


11. In the package 57 "SIMOS 8/10/11/PCR2.1" added support for ECU SIMOS8.1/8.3. Supported reading, writing (without the need to unlock), checking and correction COP.


2.8 L V6 FSI (SIMOS8.1) [RD/WR/CK]

3.0 L V6 TFSI (SIMOS8.3) [VR/WR/CK]


12. Package 58 "VAG DSG / CVT" adds support for VL300/V30/DQ500 control UNIT, work in BSL mode with VL300/V30, as well as work on OBD with DQ200 0AM, DQ250 02E. 


DQ200 (0AM) [WR/CK]

DQ250C (02E) [RD/WR/CK]

DQ250E/F (02E) [WR/CK]

VL300/V30 (01J/0AN) [WR/CK]

DQ500 (0BH/0BT) [RD/WR/CK]

VL300/V30 BSL (FLASH) [RD/WR/CK]

VL300/V30 BSL (EEPROM) [RD/WR/CK]

2018-02-19 00:08:57
0
190

Comments:

Attention: HTML characters are not allowed!
I have read Security policy and agree with conditions