PcmFlash 1.23 NEW
1 The module 12 "Honda / Acura CAN-bus" has added support for the ECU Continental LuK-UDCT used in Honda vehicles. Recording, checking and correction of K / S is supported.
2 In module 28 "VAZ / UAZ", explicit support for the ME17.9.7 ECU with a diagnostic protocol working via the CAN bus has been added.
3 In module 30 "Kia / Hyundai SIM2K" added support for reading, writing, checking and correcting the CS of the calibration area of the SIM2K-141.1 ECU.
4 The module 35 "Toyota / Lexus / Scion / Hino" supports the ECU of the 8-speed automatic transmission Aisin based on the 70F4019 microcontroller used in the Lexus LX570 vehicle. Recording, checking and correction of the COP is supported.
5 In module 41 "Scania EMS / EDC S6" the problem of recording in some modes, which appeared in version 1.2.2, has been resolved.
6 Module 51 "China" adds support for Chery MED17.8.10 ECU used to control F4J16 engines.
7 In the module 53 "Infineon Tricore BSL" added support for the ECU of the robotic gearbox SIM2K-305.
8 In module 58 "VAG DSG / CVT" added support for ECU Continental LuK-UDCT in service mode used in Honda vehicles. It supports reading, writing FLASH and EEPROM, as well as checking and correcting K / S FLASH.
9 In module 69 "Mercedes-Benz MED17 / EDC17", a test protocol for the ME9.7 ECU has been added, reading, writing, checking and correcting the COP is supported.
10 In the module 76 "Kia / Hyundai Gearbox" added test support for the ECU of the robotic gearbox SIM2K-305, it supports reading (when directly connected to the ECU), writing (modified files - only after unlocking by module 53), checking and correcting the CS.
11 In module 77 "Bosch ME9 / MED9 / EDC16 Bootloader" added support for ECU PSG16, EEPROM 95080, expanded support for CS.
12 Other useful changes.